Set a Charming Holiday Table with DIY Doily Décor and Personalized Stemware Tags
DIY Rhinestone Jersey: Bedazzle Your Game-Day Look
Team spirit, meet statement sparkle! Put your own spin on the bedazzled sportswear trend with a DIY rhinestone jersey that takes your game-day look from classic to custom. Use Aleene’s Rhinestone Adhesive to fill jersey numbers with rows of shimmering stones, then add a contrasting rhinestone border for extra definition; the glue dries clear and flexible for easy wear. Choose stones inspired by your team colors, add optional accents to the back and make every cheer a little more brilliant. Supplies: Aleene’s Rhinestone Adhesive Game day jersey Rhinestones in desired sizes Tweezers for placement Straight edge razor Stiff cardboard Pro Tip Plan your sparkle first: dry-fit a few rhinestones on the jersey without adhesive to check spacing and color combinations. Then test Aleene’s Rhinestone Adhesive on an inconspicuous area before you start. How to Make It: 1. Prep Your Jersey Start with a clean, dry game-day jersey. Insert stiff cardboard inside to separate the front and back and create a stable crafting surface, keeping the fabric smooth without stretching it. Choose rhinestone sizes and colors for the number fill and accent border, then test the adhesive in an inconspicuous area. 2. Bedazzle the Numbers Starting at the top of the first jersey number, apply a thin, even line of Aleene’s Rhinestone Adhesive to a small section. Use tweezers to place a row of rhinestones onto the adhesive, gently adjusting their positions while the glue is wet. Continue row by row, checking alignment as you work toward the bottom, and use smaller stones around tight curves and corners. Repeat until the number interiors are covered. Allow the adhesive to dry for 2-4 hours before handling the decorated area. 3. Add the Border & Back Details Frame each number with rhinestones in your chosen accent color. Apply a thin line of adhesive along a small section of the border, then use tweezers to place and adjust the stones. Continue around each number and allow the adhesive to dry for 2-4 hours. If desired, turn the jersey over once the front is dry and repeat the same process to add rhinestone details to the back. 4. Let Dry & Wear Allow the final adhesive application to cure completely for 24 hours for maximum hold before wearing your finished rhinestone jersey. Keep the decorated area flat and undisturbed while it cures. After crafting, remove the precision tip, wipe the nozzle with a dry cloth and replace the cap; store the adhesive in a cool, dry place. FAQs What glue should I use to bedazzle a jersey? Aleene’s Rhinestone Adhesive works on fabric and is designed to attach rhinestones, crystals and gems. It dries clear, flexible and permanent, and includes attachable precision tips for controlled placement. Always test on your jersey and embellishments before beginning. How long does a rhinestone jersey need to dry? Aleene’s Rhinestone Adhesive needs 2-4 hours to dry and 24 hours to cure completely for maximum hold. Keep the decorated area flat and undisturbed as it dries and allow the front to dry before turning the jersey over to embellish the back. Allow the final application to cure completely before wearing. How do I wash my finished rhinestone jersey? Hand wash finished projects made with Aleene’s Rhinestone Adhesive; do not dry clean. Check the jersey’s care label as well and confirm that hand washing is suitable before you begin the project. What are you bedazzling with rhinestones? Show us your fun ideas and tag us on social media @ilovetocreateofficial! Shop Aleene’s Rhinestone Adhesive
Easy Pumpkin Painting Ideas with Fabric Paint
Supplies Needed: Tulip Brush-On Fabric Paint Rainbow 10 Pack Faux pumpkins of varying sizes and colors Paintbrushes Cup with water Give your fall décor a scary-cute twist with easy pumpkin painting ideas that skip the carving and bring on the color! Pair faux pumpkins in different sizes and colors with playful dots and stripes for an autumn display that’s more charming than chilling. Grab your brushes and Tulip fabric paints, then mix and match your favorite shades to make this painted pumpkin project your own. Tips for Painted Pumpkins Use a small brush for dots, since it keeps them round and even. Paint stripes from the stem down so the lines follow the pumpkin’s natural curve. Choose contrast over matching so the pattern pops from a distance. Odd-numbered groupings (3 or 5) look best on a mantel or table. Step 1: Pick Your Pumpkin Color Palette Start with clean, dry faux pumpkins in a mix of sizes and colors. Choose shades from your that contrast with each pumpkin, so your designs stand out. Plan a mix of dots and stripes across the group, leaving some of each pumpkin’s original color showing. Step 2: Brush On Dots and Stripes Use a paintbrush to dab dots around one pumpkin, varying their size and spacing for a playful look. On another, paint stripes from near the stem toward the base, following the pumpkin’s curves. Alternate colors or stripe widths to give each pumpkin its own personality. Rinse your brush in water between colors and remove excess water before picking up more paint. Let each color dry before adding any overlapping details. Step 3: Let the Paint Dry and Style Your Display Allow the paint to dry completely before handling your pumpkins. Group your finished designs on a table, shelf, or mantel, mixing taller and smaller pumpkins so every pattern gets a moment to shine. Your colorful, no-carve pumpkin display is ready to add a little scary-cute style to the season! FAQs What other products can you use on faux pumpkins?Fabric Paint Markers, Puff Paint can also be used to decorate your faux pumpkins. How long does painted pumpkin paint take to dry?Let dry 4 hours or more. Always let each color dry before layering. What’s the best paint for no-carve pumpkins?Tulip Fabric Paint is the ultimate choice for no-carve pumpkins because its ultra-vibrant colors glide on smoothly with a simple brush application, ensuring a bold, streak-free design that stands out without the mess. Are you painting your faux pumpkins this year? Show us your fun ideas and tag us on social media @ilovetocreateofficial!
DIY Fall Bucket List Photo Banner with Fabric Markers
Make a little room for fall fun and the memories that come with it! This DIY Fall Bucket List Photo Banner starts with a canvas banner, your favorite seasonal activities and colorful details drawn with Tulip fabric markers. Create a photo box for each adventure, then leave the boxes empty until each activity is complete. As you check off your list, use Aleene's Instant Tacky Putty to adhere a photo inside the matching box. By the end of the season, your bucket list becomes a personalized display of fall memories! Supplies: Tulip Fabric Paint Markers Tulip Graffiti Fabric Markers Aleene's Instant Tacky Putty Large canvas banner Pencil Ribbons & trims (optional) Pro Tip Slide a piece of cardboard under the canvas before you draw so Tulip fabric marker ink doesn't bleed through to your work surface. How to Make It: 1. Plan Your Fall Adventures Lay your canvas banner flat and lightly sketch "Fall Bucket List" across the top with a pencil, then plan a box for each activity. Leave a space beneath each box for the activity name. Use the size of your intended photo prints as a guide so each box has room for a photo. 2. Add Color and Bucket List Details Use Tulip fabric markers to trace your heading, outline the photo boxes and write an activity name beside or beneath each one. Mix lettering styles and fall-inspired colors, then add small seasonal doodles around the boxes for a personal touch. 3. Make Memories and Fill Your Banner Display your banner and start enjoying the activities on your fall bucket list. After each adventure, print a favorite photo and use Aleene's Instant Tacky Putty to adhere the photo to your canvas. Are you making a bucket list banner for your goals? Show us your fun ideas and tag us on social media @ilovetocreateofficial!
How to DIY Monochrome Magic Pumpkin Purses
Turn classic orange plastic-handled pumpkins into chic, monotone statement purses with just a few colorful craft supplies! A coat of COLORSHOT gives each pumpkin a sleek, head-to-toe hue, while Tulip Puff Paint and sparkling gems add playful texture and plenty of bling. Finish with a coordinating fabric strap, and these trick-or-treat favorites are ready to carry from costume parties to Halloween outings! Supplies Needed: COLORSHOT Premium Fabric Paints Tulip Puff Paints Liquid Fusion Performance Adhesive Aleene’s Spray Sealer in finish of choice Plastic pumpkin buckets Embellishments like rhinestones, crystals and colored gems Fabric straps Carabiners Plastic table cover Step 1: Prep the pumpkins Cover your work surface with a plastic table cover. Remove any tags, make sure the plastic pumpkin containers are clean and dry, and keep the lids and handles in place so every visible surface can be transformed into one seamless color. Step 2: Spray on a monotone makeover In a well-ventilated area, spray the pumpkin, lid and plastic handle with your chosen COLORSHOT paint color. Apply several light, even coats for smooth coverage, allowing each coat to dry before adding the next. Let the painted pumpkin dry completely. Finish with an Aleene’s Sealer in finish of choice. Let dry completely. Step 3: Add dimensional details Use Tulip Puff Paint in a coordinating shade to trace the pumpkin’s grooves, outline the face or create dots, swirls and other raised accents. Keep the design tone-on-tone for a stylish monotone finish, then allow the paint to dry completely. Step 4: Bring on the bling Plan your embellishment placement, then use Liquid Fusion Performance Adhesive to attach rhinestones, crystals and colored gems. Cluster them around the eyes, scatter them across the surface or follow the raised paint details for extra sparkle. Let the adhesive cure completely. Step 5: Attach the purse strap Remove original plastic handle from pumpkin. Clip a carabiner onto each side of the pumpkin’s handle, then attach the ends of the fabric strap. Adjust the strap to your preferred length, check that every connection is secure and get ready to show off your one-of-a-kind pumpkin purse! How are you decorating your Halloween accessories? Show us your fun ideas and tag us on social media @aleenesDIY!
How to Bedazzle Your Homemade Taco Costume
This dazzling DIY is ready to steal the spotlight at any Halloween celebration.
Earn Your Stripes: DIY Zebra Jacket with Fabric Paint
Ready to earn your stripes? This bold zebra jacket takes a plain white long coat and transforms it into a wild, fashion-week-inspired statement piece with just fabric paint, a brush, and a little creative confidence. The best part is that the design is meant to be freehand and playful, so there’s no stencil, measuring, or perfect pattern needed—just prep the jacket, paint on random black zebra stripes, add optional glow paint for extra flair, and let it dry. It’s an easy DIY with major style payoff, perfect for anyone who wants to make something fierce, fun, and totally one-of-a-kind. Supplies Needed: Tulip Fabric Paint Black Tulip Fabric Paint Glow (optional) White long coat Paintbrush Water cup Paint palette or disposable plate Paper or plastic piece PROJECT INSTRUCTIONS 1. PREPARE YOUR JACKET FOR DESIGNING Prewash and dry jacket. Lay perfectly flat. Place paper or plastic in between layers to avoid paint seeping through to opposite side. 2. APPLY FABRIC PAINT Use your paintbrush to paint zebra stripes randomly over white jacket. There’s no right or wrong way to do this. (If desired, add in stripes of glow paint so you can shine in the dark, too!) Let dry and apply second coat. 3. LET IT DRY Let dry completely 4 hours or more. Machine wash (inside out) after 72 hours. How are you crafting your wild side? Show us your animal designs and tag us on social media @TulipColorCrafts!
The Art of Making Paper Flowers with Pink & Posey
With Aleene’s Tacky Glue, creating your own paper flowers is simple, fun, and beginner-friendly—just cut, shape, glue, and watch each petal come together into a beautiful handmade bloom.
Patchwork Football Spirit Gear Sweater
Mix and match fabric pieces to create a playful football design, then glue it onto a cozy red sweatshirt for instant spirit gear.
Dorm Room Color Refresh: DIY a Pink Room Divider & Painted Frames
Bring color and personality to your dorm room with COLORSHOT! Paint a room divider pink, refresh frames in your favorite shades, and turn everyday décor into custom pieces that make your space feel totally your own.
How to Make DIY Senior Jeans with Fabric Paint
Create custom DIY Senior jeans with Tulip Brush-On Fabric Paint! Paint SENIOR lettering, school colors, and graduation-year details for a personalized senior-year outfit.
Easy Spray Paint Makeover for Metal Folding Chairs
Turn ordinary metal folding chairs into colorful statement pieces with COLORSHOT Premium Spray Paint. This easy DIY adds bold, custom color to functional seating for parties, patios, craft rooms, and more.
Make Your Own Personal Junk Journal with Tacky Glue
Creating a junk journal is a delightful way to preserve your personal memories while exploring your creativity.
DIY Firefighter Family Halloween Costume with Spray Paint
Looking for a fun and easy DIY Halloween costume idea for the whole family? Check out this tutorial from. Creative Living with Lynn Lilly and learn how to make your own firefighter family Halloween costume with COLORSHOT Premium Spray Pain
10 Glow in the Dark Pumpkin DIYs
Want to create the coolest pumpkin on the block this year? Break out the Tulip Puff Paint and create a glowing pumpkin that will get lots of oohs and ahhs from the neighborhood kids. Here's just a few fun ideas that will help spark your creativity and get you into the Halloween spirit! For this glowing pumpkin creation, you simply squeeze out the paint in a clockwise twist of the hand all around the pumpkin. You can play around with the thickness and colors of the paint too! Mix it up with geometric designs on your pumpkin. Cover your pumpkin in circles, squares, and triangles. The all-over coverage makes this pumpkin a winner! Create this simple Boo pumpkin with dots all over your pumpkin! The dot design is so easy to make! You could also do initials or just dots without the words. Another option is to do giant dots! This pumpkin was created layer rings of paint all over! This pumpkin used the "natural" glow dimensional paint and went wild with geometric designs allover. Loved how brightly it glows! We love how these pumpkins were created. Very abstract and fun on the two on left and right. And the skull pumpkin is a funky idea for your Day of the Dead festivities! This pumpkin will make you go EEEK! when the lights are turned off. Love how the colors twist up the stem too! This monogram pumpkin is so easy to make! All you need to do is place a sticker down on the pumpkin and dot around it with the glow paint! You can make a personalized one for every family member or spell out a phrase with several pumpkins. This is the ultimate glow pumpkin by Jaderbomb and so easy to make! You simply squeeze the paint along the indents of the pumpkin in stripes! Here's a slight variation of the one above! For this design, the paint was squeezed onto the pumpkin and let it drip out like it was melting. Then a heat gun was used and crackled the paint for this super cool effect! Which of these pumpkins is your fave? No matter which one you choose, expect lots of reactions when someone sees your finished pumpkin!
Let It Shine T-shirt
Let your stellar fashion sense shine with a DIY tee that looks designer! This quick and easy tutorial will show you why painter's tape and Tulip® ColorShot should be your new best friends. Supplies Tulip ColorShot Instant Fabric Color, Silver Tablecoth Tape Freezer paper Steps: Step 1: Wash and dry your shirt without fabric softener before you start your project. Make sure to cover your work surface with a disposable tablecloth and insert freezer paper or a piece of cardboard into your shirt to prevent any potential paint seepage to the backside. Step 2: Use painter's tape to block off a large square section on the front of your shirt, then run random strips of tape across the square to create a cool, geometric design. Step 3: After you've created a design you like, tape paper towels around the rest of your shirt to protect it from potential overspray. Step 4: Spray several light coats of ColorShot spray over your design, letting each coat dry a few minutes before adding another. Step 5: Once you're happy with your paint coverage, remove the strips of tape and let your shirt dry completely. See how easy it is to make something so chic? It's up to you whether you want to let your friends in on your little secret!
DIY Dog Costume: No-Sew Burger with Felt Glue
If you’re like us you love dressing up your dogs for Halloween with DIY dog costumes! Get your pets in on the spooky season festivities with an adorable no-sew burger costume! This tutorial from Oh Yay Studio will show you how to make a tasty-looking hamburger costume for your pets using Aleene’s Felt & Foam Tacky Glue. Halloween has never looked so cute! What you need: Aleene’s Felt & Foam Tacky Glue 1 round foam ball Felt in “burger” colors (tan, white, green, red, yellow) Scissors Knife Paintbrush Brown paint Elastic or ribbon Straight pins (optional) Step 1 Use knife to cut your foam ball into 4 pieces for this burger costume. The top rounded piece will be the top bun, the second piece will be the patty, third will be the bottom bun. Set aside the bottom rounded piece for another craft project! Step 2 Cut a circle of tan felt to fit the top rounded piece, leaving approximately 3 inches around the edges to fold to the underside. Step 3 Use Aleenes Felt & Foam Tacky Glue to glue the felt in place. Optionally, you can secure the felt in place temporarily with straight pins while the glue dries. You'll want the felt to be nice and taut as to eliminate any creases in your DIY dog costume! Step 4 Repeat steps 2 and 3 with the third piece of your foam ball to create the bottom bun. Step 5 This classic burger costume would not be complete without sesame seeds on the bun! Use scissors to cut out seeds from white felt and glue to the top bun. Step 6 Next, you’ll want to create a juicy patty for your dog’s burger costume! Take the second piece of the foam ball and paint all sides brown. Add extra details, such as grill marks and shading, for a more realistic patty. Set aside to dry completely. Step 7 While the patty is drying, cut some felt to create toppings for your DIY dog costume. For this project, Oh Yay Studio made lettuce, pickles, tomatoes, and cheese. Get creative with the details to make a one-of-a-kind burger costume for your pup! Try making felt onions, mushrooms, bacon, or any other combination of condiments and toppings! Step 8 Once the paint and glue have dried, it's time to start assembling your dogs burger costume! Remove any pins and begin layering your burger. Start with the bottom bun, then glue down your lettuce, patty, cheese, tomatoes, pickles, and any other toppings. Lastly, glue down the top bun and squeeze the burger together to ensure everything is properly adhered. Step 9 Once the burger costume has set, add elastic or ribbon to the bottom to fit your dog's body. Secure with glue and allow to dry completely. Step 10 Its finally time to dress up your pup! Be sure to snap some photos of this adorable DIY dog costume before the Halloween festivities begin. Will you be creating a burger costume for your furry friends this Halloween with Aleenes? Whether you are going for spooky or cute, we want to see your DIY dog costumes! Snap a pic of your pup and us on social media @AleenesDIY!
The Ultimate Greek Life DIY Checklist: Overalls, Boots & Banners with Fabric Paint
Level up your Greek lifestyle with three trendy, customizable DIY projects. Discover how to create custom fabric-painted overalls, personalized sorority cowboy boots, and a bold canvas banner perfect for your next chapter photoshoot.
Personalize Your Dorm Room with No-Sew Felt Pennants
Personalize your dorm room or sorority space with a handmade felt name pennant using Aleene’s Felt & Foam Tacky Glue, plus lace, ribbon, studs, or rhinestones for extra flair.
DIY Whimsy Utility Jacket with Fabric Paint & Markers
Transform your utility jacket into a piece of art using Tulip Fabric Paint and Tulip Fabric Markers!
Golf-Inspired Gifts for Dad with Tacky Glue
These creative Father’s Day projects combine sporty charm with handmade style, all brought together with Tacky Glue for fun, personalized gifts.
Easy World Cup Craft Ideas with Tulip
Craft Your World Cup Spirit Get ready for match day with fun, colorful World Cup crafts that show off your fan spirit in creative style. This roundup features three easy ideas: a blue denim bucket hat with a stenciled soccer ball, a classic soccer ball painted with logo-inspired colors, and a black T-shirt decorated with a bold FIFA World Cup design. #1 Soccer Ball Bucket Hat Create a stylish blue denim bucket hat that’s game-day ready by stenciling a classic soccer ball design onto the front with fabric paint. It’s an easy way to show your World Cup spirit while giving a simple accessory a fun, sporty makeover. #2 Colored Soccer Ball Give a classic soccer ball a colorful twist by painting the black spots in shades inspired by the FIFA World Cup logo for a bold, eye-catching look. It makes a fun accessory to display while watching the World Cup and adds an extra pop of fan spirit to your celebration. #3 FIFA World Cup T-shirt Turn a plain black T-shirt into bold fan gear by adding a FIFA World Cup logo and bright, colorful details that really make the design pop. It’s a fun way to create a standout look for watching the World Cup and showing off your World Cup spirit in style. #4 World Cup Hand Painted Pants Transform a plain pair of denim pants into the ultimate game-day statement piece using fabric paint. Hand paint your bold soccer balls and add scattered festive stars. These custom jeans will be the perfect way to sport your team pride all tournament long. How are you creating for World Cup? Show us your fan swag and tag us on social media @TulipColorCrafts! Check out these links and get inspired for your next colorful DIY! Shop Tulip Puff Paint Explore Tulip Fabric Paint Projects Explore Tulip FAQs
Summer Camp Activities with Tulip Craft Supplies
Tulip’s wide assortment of kid-friendly craft supplies makes it easy for all ages and skill levels to enjoy creating with color! Keep reading and discover some of our favorite kid-friendly camp activities to try with Tulip craft supplies.
Create Stunning Wooden Wedding Hangers with Flat Back Pearls & Aleene’s Super Glue
Transform simple wooden hangers into elegant, personalized wedding keepsakes by adorning them with flat back pearls and Aleene’s Super Glue for a stylish and meaningful finishing touch.
Make Your Own Stars & Stripes T-shirt with Puff Paint
Show your 4th of July spirit with Tulip! Learn how to use Puff Paint to create a custom 4th of July outfit with this easy tutorial from @lulu__make.
Gallery Wall DIY Hack: Spray Painting Frames and Mats
This is your sign to finally make that gallery wall you’ve been putting off! Bring your dream gallery wall to life with COLORSHOT!
Create Tie-Dyed and Hand-Painted Banners with Tulip
This interactive project transforms standard tie-dye activities into a memorable, shared artistic experience.
DIY Hack: How to Airbrush a Matching Lounge Set with Fabric Markers
Transform a plain matching lounge set into a vibrant, custom piece with the Tulip Airbrush Marker Kit.
Easy Mother's Day Gift Idea: How to Stamp Designs for Painted Plates
With the Tulip Painted by Me Plate Painting Kit, some pretty stamps and your creativity, you’ll have an heirloom plate set in no time.
10 Nature-Inspired Tie-Dye Ideas with an Earthy Color Palette
Infuse the serene beauty of nature into your tie-dye projects with Tulip One-Step Tie Dye! This curated collection of tie-dye ideas captures the earthy color palette of the natural world.
How to Make Color Changing Tie-Dye T-Shirts
Check out this easy tutorial from @lulu__make and learn how to make whimsical color changing tie-dye T-shirts with Tulip!
How To Use Spray Paint For Your Spring Crafts
Is anyone else getting excited for spring? We’re ready for some extra sunshine and rainbows, so we’re making our own to tide us over til the real deal is in full effect. Most of us have been working on crafts and home décor projects in the past year, so if you have some extra COLORSHOT Spray Paints left over, we have a new spring craft for you! At Charlotte’s House will show you how to use spray paint to brighten things up around your house with this colorful rainbow pottery DIY using thrifted vases. What you need: - COLORSHOT Premium Spray Paints in desired colors - Ceramic vases in various sizes and shapes - Protective surface cover - Tools/products to remove labels (if needed) This spring craft is the perfect way to upcycle old vases you have stashed in your cabinet, or vases you can find super cheap thrift shopping. If you picked your vases up in a store, make sure to remove any labels or price stickers and clean the vases to remove dust and prints. Working in a well-ventilated area, cover your work surface to protect it, then spray several light coats of paint onto your vases/ceramicware instead of one heavy coat. This will help prevent the paint from dripping or pooling. Tip: don’t paint the insides of the vases if you plan on using them to display real flowers or plants that need water. Once you’re happy with your spray paint coverage, let everything dry completely. For this spring craft, you’ll want to use lots of bright colors! You can go with a whole spectrum of color or variations of blue, green or any of your favorite shades for a more monochromatic look. Now that you know how to use spray paint on glass & ceramics, get creative and have fun making your own decorative spring arrangement! You can display your rainbow vases on a shelf like At Charlotte’s House, or fill them with plants and flowers if you’re looking for a vibrant and functional set of vases. What other spring crafts are you making with COLORSHOT Premium Spray Paints? Share with us on social by tagging us @mycolorshot!
BEYOU TIE-DYE KIT ( General Instructions )
Read through all directions before beginning. Supplies Natural fiber fabric (light color) – silk, wool, rayon, cotton Plastic trash bags to cover work surface Plastic bag or plastic wrap Step 1 – Set Up Work Surface Protect work surface with plastic trash bags. Cover with a layer of paper towels. Step 2 – Prewash Fabric Prewash fabric to remove sizing. Do not use fabric softener or dryer sheet. Choose desired technique. If using dry technique, dry fabric in dryer. If using wet technique, use directly from washer. Step 3 – Prepare Fabric If using a flat method of dyeing, place plastic wrap or trash bag between layers of fabric to keep dye from seeping through to other side. Step 4 – Mix Dye Wearing protective gloves, add water to dye bottle and fill to the neck. Replace cap tightly. Shake until dye is dissolved. Use full-strength for intense colors. For a lighter shade of color, add more water using extra bottle if needed. Apply dye within 24 hours after mixing. Note: Dye left unapplied after 24 hours will begin to lose concentration and will result in noticeably weaker color intensity. Do not add water to dye until you are prepared to apply it. Step 5 – Dye Fabric Apply dye on fabric, checking to make sure dye has penetrated into folds. Do not over-saturate fabric. If dye is applied too close together, the colors may become muddy. Step 6 – Wrap, Let Set, Rinse Cover dyed fabric with plastic wrap to keep damp. Let set 6–8 hours or longer for most intense colors. Rinse until water is clear. Cut rubber bands if used. Fill washer to large load setting with hottest water suitable for fabric and a small amount of laundry soap. Wash and dry separately for the first few times. Hints Always wear gloves when working with dyes Do not allow dyed fabric to rest wet on other items Make sure excess dye dust is removed from work area Create new colors by blending dyes
How to Make the Sweetest Food Crafts with Puff Paint
Create adorable faux treats with our step-by-step stuffed felt cookies tutorial! Perfect for the foodie craft trend, explore DIY felt cookies with Tulip!
Crafting Miniatures with Tacky Glue
Using paper, scissors and a little imagination, you can create miniature furniture and miniature accessories you can be proud of!
Easy DIY 100 Days of School T-shirt with Puff Paint
Creating a custom Puff Paint shirt for the 100th day of school is a fun and creative way to celebrate this milestone.
How to Airbrush Paint a Sweatshirt with Fabric Markers
Unleashing your creativity on a plain sweatshirt can be as easy as grabbing the Tulip Airbrush Marker Kit!
DIY Pet Stocking with Fabric Paint
If you’re looking for a pawsitively adorable way to include your pet in the holiday festivities, why not make a DIY pet stocking adorned with paw prints! Let’s get started on creating a paw print stocking for your beloved pet.
No articles match the selected filters.
The Family of Brands
Meet the Brands Behind
Your Next Project
Seven creative brands. One place to shop. Explore the tools, colors, and ideas makers trust.
Tulip Color
Aleene's Adhesives
COLORSHOT Premium Spray Paint
Scribbles
Puffy Paint
#BeYou
CreateBasics
