First, wash your kimono and make sure it is completely saturated with water, then wring out the excess water.

Protect your workspace with a disposable plastic surface cover. Follow the product instructions to properly mix your dyes with water before beginning. Holly used six colors to dye her kimono, but you can use as many or as few colors as you’d like!

Lay your Kimono flat, front side up, and get your rubber bands ready to create your tie-dye design! You can use any tie-dye technique you’d like for your look, but for this project, Holly used the bullseye tie-dye technique to create small bullseye patterns all over her kimono. To create a similar look, start by pinching the fabric in one spot and pulling it upward about 4 inches. Wrap a rubber band around this section at the base, then wrap another 2 inches above it. Repeat this process all over the kimono where you’d like the bullseye patterns to appear.

Arrange the damp kimono evenly on top of a wire rack to prevent the dye from pooling underneath the kimono. It’s okay if it gets scrunched up here! Put on the gloves provided in the kit and proceed to add dye to the sectioned-off bullseye shapes where you would like color to appear. You can make each bullseye a different color or several colors by applying a different color between each banded section.

Wrap your entire project in plastic wrap or place it into a large plastic bag and let the color set according to product instructions.

Once the set time is over, carefully remove the kimono from the plastic and cut off the rubber bands to reveal the designs. Be extra careful when cutting off the rubber bands so you don’t accidentally cut the fabric!

Rinse the kimono under cool water until the water runs clear. Wash and dry according to kit instructions.

Swoon! We love how vibrant and colorful this tie-dye kimono turned out.

Whether you just jumped out of the pool or you are dancing your heart out to the grooviest tunes, this tie-dye kimono is sure to be your favorite thing to wear all summer long!