Lastest Articles
My transfer is peeling up, now what?
Carefully apply appropriate glue to the lifted section of the transfer and press to surface with fingertips. This will bond it to the fabric.
What are the best fabrics for applying iron-on transfers?
Tulip iron-on transfers can be ironed on to most machine-washable fabrics, including cotton, poly/cotton blends, canvas, denim and all colors of fabric.
What is the proper setting for my iron in order to apply transfer?
Preheat iron to a setting between 325 and 350 (wool and cotton). If using a steam iron, remove all water from the iron, as moisture will ruin the transfer. If necessary, iron fabric prior to applying the transfer to remove any wrinkles.
How should I wash my garment or fabric?
Turn fabric inside out. Machine wash according to fabric instructions. Do not use harsh detergents or bleach. Remove promptly and line dry. To iron, turn garment inside out, being careful not to touch design with iron. Do not dry clean.
How do I apply the iron-on transfer?
To apply iron-on transfer, place fabric on a hard surface such as a table or counter covered with a smooth, thin towel. Position transfer on fabric, transfer side down. Iron on transfer with a firm, even, circular motion for one minute. Let paper cool completely, about 2 minutes. Starting at one corner, slowly peel backing paper away from fabric, making sure design has completely transferred. Continue to gently peel backing paper away from fabric in a smooth, continuous motion. If design does not adhere to fabric, carefully replace backing paper and repeat steps.
Why should I wash my fabric before applying the transfer?
We recommend washing your fabric to remove sizing. Sometimes the sizing will prevent the transfer from adhering properly and can cause the transfer to peel off.
How should I prepare my fabric before applying the iron-on transfer?
Pre-wash all fabrics using no liquid softener or dryer sheets. Let dry and press out any wrinkles.
How long should I wait before I wash what I’ve made with my iron-on transfer?
We recommend waiting 72 hours after applying the iron-on transfer before washing the fabric.
What is the proper iron setting to apply the Tulip Iron-on Crystals?
Preheat iron to a setting between 325 and 350 (wool and cotton). If fabric is wrinkled, iron fabric prior to applying the crystals. If using a steam iron, remove all water from iron. Do not use an ironing board; lay a towel over a hard surface to iron.
My crystals have peeled off, now what?
Use our washable glue to hold in place. Use a toothpick to add a small dot of glue where needed and press stone into place. Let dry.
What are the best fabrics for applying Tulip Iron-on crystals?
Tulip Iron-on Crystals can be ironed on to most machine-washable fabrics, including cotton, poly/cotton blends, canvas and denim. Use fabrics that can hold up to high heat.
How long should I wait before I wash what I’ve made with embellishments?
We recommend waiting 72 hours before washing the fabric with your new embellishments.
