Easy and fun! You will love this tie-dye technique!
Steps
Step 1:
Gather your tie-dye kit, pre-washed 100% cotton T-shirt, disposable surface cover and plastic bag or wrap and you're ready to go!
Step 2:
To mix your dyes, simply add tap water to the fill line on each bottle, replace the nozzles with the caps still on, and shake each bottle thoroughly until all dye powder dissolves. Wait to mix your dyes until you are ready to apply them. Dyes left unapplied for more than 72 hours might lose their concentration and therefore might not appear as vibrant after dyeing.
Step 3:
Lay your damp shirt out flat horizontally on your covered work surface. Starting on the side closest to you, accordion fold (over & under) the entire shirt in even folds, working your way to the other side.
Step 4:
Bind your folded T-shirt by wrapping rubber bands around it, evenly spacing your rubber bands several inches apart. You can even wrap more around your shirt closer together; the more rubber bands you use, the more white space and accordion tie-dye patterns you’ll have in between your dye areas.
Step 5:
It’s not a necessity, but if you have one, place your damp, bound T-shirt onto a wire rack before dyeing to help prevent the different dye colors from pooling underneath and potentially muddying the colors. We applied one dye color to the entire project in between rubber bands, but you can apply a different color to each bound section if you want, or alternate colors between each section. Get creative and have fun! Make sure to rotate your project as you apply your dyes to match colors on the other side.
Once you’ve finished adding your dye(s) to your project, place your tie-dye project into a sealable bag, or wrap it in plastic wrap. This will help keep the project damp while the dye fully processes. Leave the project sealed for 6 to 8 hours or overnight for the dye to completely set.
Step 6:
After the dye colors have completely set, remove the rubber bands by carefully cutting away from your project. Rinse, wash and dry separately according to your kit instructions.
Step 7:
Fold your damp T-shirt in half vertically, then accordion pleat from the base of the shirt all the way to the top of the shirt, making sure to pleat the sleeves as well.
Step 8:
Bind your pleated shirt with rubber bands, wrapping them tightly around the shirt every 1 to 1.5 inches apart.
Step 9:
Place your bound T-shirt on a wire rack (if you have one), then apply your dye colors as desired to each banded section. Whatever color pattern you choose, make sure to rotate your project and match the colors on the back side.
Once you’ve finished adding your dye(s) to your project, place your tie-dye project into a sealable bag, or wrap it in plastic wrap. This will help keep the project damp while the dye fully processes. Leave the project sealed for 6 to 8 hours or overnight for the dye to completely set.
Step 10:
After the dye colors have completely set, remove the rubber bands by carefully cutting away from your project. Rinse, wash and dry separately according to your kit instructions.
Step 11:
Lay your damp T-shirt out flat with the base of the shirt closest to you. Create small, tight accordion pleats starting at the base edge and working your way all the way up to the top of the shirt. Make sure to pleat the sleeves as well. Once you have the shirt tightly pleated, form it into an S-curve pattern, creating around 4 to 5 curves depending on the size of your shirt.
Step 12:
Bind your S-curved/pleated shirt with rubber bands. Use 2 rubber bands vertically around the center to hold in place, then crisscross 2 more rubber bands with the ends at each corner so the entire shirt is held secure.
When using the ice tie-dye technique, we recommend placing your project on a wire rack over a bucket or bin to collect all of the dye and ice as it melts. Open your unmixed dye bottles and
Step 13:
After the ice has completely melted, remove the rubber bands by carefully cutting away from your project. Rinse, wash and dry separately according to your kit instructions.
Wash your shirt and leave damp. Lay it flat on your work surface.
Create an eyeball shape on a piece of scratch paper and cut it out. Make sure it's the size you want the design on your shirt to be. Fold the shirt in half lengthwise, then fold the eyeball cutout in half and place the fold of the eyeball shape on the fold of the shirt. Trace around it with a washable marker.
Create a circle pattern on another piece of scratch paper and cut out. This will be the iris of the eye. Fold in half and place the fold of the circle on the fold of the shirt in the center of the half-eye shape. Trace with a washable marker.
Use the washable marker to sketch a smaller half circle within the iris of the eye. This will be the pupil of the eye design.
Begin by pleating the smallest circle (the pupil), keeping the pleats along the marker line. Secure tightly with a rubber band.
Next, pleat along the second line (the iris) and secure tightly with a zip tie.
Pleat along the final marker line and secure with another zip tie.
Secure the remainder of the shirt with additional rubber bands if you would like to create additional sections of color beyond the eyeball design. You can add as many as you like!
Add black dye to the very tip of the shirt (the pupil section).
Add a stripe of black dye along the third binding. This will create the accent around the eye.
Add whatever color of dye you would like to the iris section of the eye. Add additional dye colors between the bound sections of the shirt to your liking.
