Tulip ColorShot Interior Fabric Upholstery Spray Charcoal

Use in a well-ventilated area. Always test first in an inconspicuous area for best results.

1. Thoroughly clean and dry fabric to ensure it is free of lint and oils.
2. Mask off surrounding areas to protect from overspray.
3. Shake can well for at least one minute. Hold can 6-8” away from fabric and spray with smooth, even strokes.
4. Apply one coat at a time, waiting 5 minutes between coats. Add additional coats to achieve desired color and intensity.
5. Let dry 72 hours.
6. Turn can upside down after use and spray for 5 seconds to prevent clogging.

• Works best on light-colored fabrics.
• Spray can turn a light fabric dark, but cannot turn a dark fabric to a lighter color.
• Two light coats are recommended.
• Coverage area for one can is one-square yard (when using two light coats).
• Apply light coats. Thicker applications will cause a stiffer end result.
• Apply alternating coats in different directions to ensure full coverage (left to right, then top to bottom).
• For hard-to-spray areas, first spray color onto a piece of foil and use a stiff brush to dab the fabric with color.
• To clean sprayed material, use mild soap and water.
• Hold can upright at no more than a 45-degree angle.