Kaleidoscope Ice Tie-Dye Technique
Kaleidoscope Ice Tie-Dye Technique
Kaleidoscope Ice Tie-Dye Technique
Remember the fun colors and shapes from your childhood kaleidoscope? Now create them on a shirt using powdered dye and ice! Steps Step 1: Fold damp shirt in half lengthwise and press flat on tabletop. Step 2: Pinch shirt where you would like the center of your first spiral to be, then twist fabric a few times to create a small spiral. Step 3: Maintaining first spiral, pinch another section of shirt and twist several times to create a second spiral. Step 4: Crumple the remaining fabric towards the spirals. Step 5: Bind the shirt with rubber bands to hold secure. Step 6: Make a paper ring to fit around bound shirt. This will help keep the ice in place when dyeing. Step 7: Place ice on top of bound shirt. Step 8: Instead of adding water to dye bottles to mix, squeeze dye powder of a few colors on top of ice. Step 9: Let ice melt and remove paper ring. Step 10: Flip shirt over and repeat process on the backside with additional dye powders. Step 11: Once the backside has been dyed, cut off the rubber bands, then launder according to instructions.
Ice Dye Technique
No need to mix up your dyes for the ultra-cool ice tie-dye technique! Let the ice do the work to produce one-of-a-kind watercolor tie-dye effects. Steps Step 1: Wash your shirt (or other fabric item) and leave damp. You don't have to presoak your fabric in soda ash before dyeing because Tulip One-Step Tie Dye contains soda ash in the formula! Lay your damp fabric out flat on your covered work surface and decide which tie-dye technique you would like to create before adding your dyes. With the ice dye technique, the crumple tie-dye technique (shown) works great, but you can experiement with other techniques if you want. There's no wrong way to tie dye! Step 2: Place your damp shirt on a wire rack (over a bucket is recommended to catch the dye as it melts). Scrunch your shirt into a tight mound and use rubber bands to hold the fabric tightly in place. Cover your entire project with ice. Step 3: For the ice tie-dye technique, you don’t need to mix your One-Step Dyes with water before dyeing your project. The ice is going to do the work! Remove the nozzles from your dye bottles and sprinkle the powder randomly over the ice. Get creative with it – there’s no dye placement strategy here! You can add as many dye colors as you like. Step 4: Once you’ve added your dye powders, let the ice completely melt. As the ice melts, it will transfer the dyes to the shirt underneath for cool watercolor patterns. Depending on where you live and the weather temperature, it could take a while for the ice to melt or not much time at all. If the ice melts quickly, you can then place your project into a sealable bag and allow the dye to set for 6 to 8 hours. If it takes about this long for the ice to melt, it’s time to skip the bag and move on to the next tie-dye step! Step 5: Once your ice has melted, remove the rubber bands and check out your cool ice crumple tie dye! Rinse, wash and dry according to your instruction guide.
Ice Dye Technique
Ice Dye Technique
No need to mix up your dyes for the ultra-cool ice tie-dye technique! Let the ice do the work to produce one-of-a-kind watercolor tie-dye effects. Steps Step 1: Wash your shirt (or other fabric item) and leave damp. You don't have to presoak your fabric in soda ash before dyeing because Tulip One-Step Tie Dye contains soda ash in the formula! Lay your damp fabric out flat on your covered work surface and decide which tie-dye technique you would like to create before adding your dyes. With the ice dye technique, the crumple tie-dye technique (shown) works great, but you can experiement with other techniques if you want. There's no wrong way to tie dye! Step 2: Place your damp shirt on a wire rack (over a bucket is recommended to catch the dye as it melts). Scrunch your shirt into a tight mound and use rubber bands to hold the fabric tightly in place. Cover your entire project with ice. Step 3: For the ice tie-dye technique, you don’t need to mix your One-Step Dyes with water before dyeing your project. The ice is going to do the work! Remove the nozzles from your dye bottles and sprinkle the powder randomly over the ice. Get creative with it – there’s no dye placement strategy here! You can add as many dye colors as you like. Step 4: Once you’ve added your dye powders, let the ice completely melt. As the ice melts, it will transfer the dyes to the shirt underneath for cool watercolor patterns. Depending on where you live and the weather temperature, it could take a while for the ice to melt or not much time at all. If the ice melts quickly, you can then place your project into a sealable bag and allow the dye to set for 6 to 8 hours. If it takes about this long for the ice to melt, it’s time to skip the bag and move on to the next tie-dye step! Step 5: Once your ice has melted, remove the rubber bands and check out your cool ice crumple tie dye! Rinse, wash and dry according to your instruction guide.
Advanced Tie-Dye Technique: Sunburst Ice Dye
One of the best things about tie dye is that it’s fun for all ages and experience levels! If you’re interested in a more advanced tie-dye technique, we’ve got you covered! Check out this advanced tie-dye tutorial from The Pretty Life Girls and learn how to tie dye using the sunburst ice dye technique. Tulip’s Ultimate Summer Bundle Tie-Dye Kit is perfect for this project— it’s got tons of vibrant colors so that you can tie dye like a pro! What you need: Tulip Ultimate Summer Bundle Tie-Dye Kit 100% cotton T-shirt Wire rack + tray Rubber bands or twine Ice Scissors Sealable plastic bag (optional) Scrap fabric (optional) Clothespins (optional) Step 1 Prewash tee, pinch and pull fabric to create sunburst Before you get started on this advanced tie-dye technique, cover your work area with the included protective surface cover and prewash your shirt to remove sizing. Lay your damp shirt flat, then pinch fabric and pull upward few inches to create a sunburst. Step 2 Bind to create multiple sunbursts Tightly wrap a rubber band or twine 1 to 2 inches below tip of the fabric, then continue binding with desired amount of rubber bands. Repeat for desired number of sunbursts throughout the shirt. For this advanced tie-dye technique, Pretty Life Girls made 6 sunbursts with 3 to 4 sections each. Step 3 Place bound fabric on grate and place ice guard around fabric Once you’ve finished binding your fabric, place it on top of a wire rack over a baking tray to catch excess dye. Pretty Life Girls also created a makeshift guard out of scrap fabric and clothespins to contain the ice. Step 4 Sprinkle the fabric with dye powder This advanced tie-dye technique uses the ice dye method, so there’s no need to mix the dyes with water. Sprinkle dye powder directly from the bottles onto the fabric, making each banded section its own color. Step 5 Cover project with ice and let melt Cover your project in ice and allow the ice to melt completely. As the ice melts, the colors will transfer onto your T-shirt with beautiful watercolor effects. If you see unsaturated dye powder on your T-shirt after the ice starts melting, just add more ice and allow it to melt again. Depending on where you live and the weather temperature, it could take a while for the ice to melt or not much time at all. If the ice melts quickly, place your project into a sealable bag and allow the dye to set for 6 to 8 hours. If it takes about this long for the ice to melt, skip the bag and move on to the next tie-dye step! Step 6 Use scissors to cut rubber bands or twine Once the ice has melted, use scissors to carefully cut and remove any rubber bands or twine.
Advanced Tie-Dye Technique: Sunburst Ice Dye
Advanced Tie-Dye Technique: Sunburst Ice Dye
One of the best things about tie dye is that it’s fun for all ages and experience levels! If you’re interested in a more advanced tie-dye technique, we’ve got you covered! Check out this advanced tie-dye tutorial from The Pretty Life Girls and learn how to tie dye using the sunburst ice dye technique. Tulip’s Ultimate Summer Bundle Tie-Dye Kit is perfect for this project— it’s got tons of vibrant colors so that you can tie dye like a pro! What you need: Tulip Ultimate Summer Bundle Tie-Dye Kit 100% cotton T-shirt Wire rack + tray Rubber bands or twine Ice Scissors Sealable plastic bag (optional) Scrap fabric (optional) Clothespins (optional) Step 1 Prewash tee, pinch and pull fabric to create sunburst Before you get started on this advanced tie-dye technique, cover your work area with the included protective surface cover and prewash your shirt to remove sizing. Lay your damp shirt flat, then pinch fabric and pull upward few inches to create a sunburst. Step 2 Bind to create multiple sunbursts Tightly wrap a rubber band or twine 1 to 2 inches below tip of the fabric, then continue binding with desired amount of rubber bands. Repeat for desired number of sunbursts throughout the shirt. For this advanced tie-dye technique, Pretty Life Girls made 6 sunbursts with 3 to 4 sections each. Step 3 Place bound fabric on grate and place ice guard around fabric Once you’ve finished binding your fabric, place it on top of a wire rack over a baking tray to catch excess dye. Pretty Life Girls also created a makeshift guard out of scrap fabric and clothespins to contain the ice. Step 4 Sprinkle the fabric with dye powder This advanced tie-dye technique uses the ice dye method, so there’s no need to mix the dyes with water. Sprinkle dye powder directly from the bottles onto the fabric, making each banded section its own color. Step 5 Cover project with ice and let melt Cover your project in ice and allow the ice to melt completely. As the ice melts, the colors will transfer onto your T-shirt with beautiful watercolor effects. If you see unsaturated dye powder on your T-shirt after the ice starts melting, just add more ice and allow it to melt again. Depending on where you live and the weather temperature, it could take a while for the ice to melt or not much time at all. If the ice melts quickly, place your project into a sealable bag and allow the dye to set for 6 to 8 hours. If it takes about this long for the ice to melt, skip the bag and move on to the next tie-dye step! Step 6 Use scissors to cut rubber bands or twine Once the ice has melted, use scissors to carefully cut and remove any rubber bands or twine.
Stay Cool in These Ice Tie-Dye Looks
Published Date: September 09, 2022 Summertime is the perfect time to try the ice tie-dye technique! Hot weather calls for cooling off in style, which is one of the many reasons we're big fans of ice tie dye. The other reason we love this fun tie-dye technique is that the ice does the dye work for you, so you can kick up your feet with a cold bevvy and relax while the tie-dye magic is happening. That's right, no need to mix up your dyes; just pour the powder over a mound of ice with your project underneath and let the melting process create the coolest watercolor effects. To help get you inspired, here's a roundup of ice tie-dye projects featuring a mix of colors and tie-dye patterns. Check 'em out then raid your freezer and get started on your new favorite tie-dye technique! Supplies needed - Tulip One-Step Tie-Dye Kit of choice - White 100% cotton T-shirt - White canvas shoes - Wire rack - Bucket - Ice (enough to cover entire project) Instructions Kaleidoscope Ice Tie-Dye T-shirt If you had a kaleidoscope as a kid, you'll definitely remember how cool it was to look through the view opening and see all of the colors twist, dance and change shape as you rotated the piece on the end. This tricked-out tie-dye T-shirt is just like that! With all of its colors and winding patterns, it's no wonder we called this technique the Kaleidoscope Ice Tie-Dye Technique! For this one, you'll want a larger tie-dye kit so you can use a lot of different dye colors. Follow the easy tutorial to create an ice tie-dye T-shirt that's pretty much guaranteed to be your go-to tee all summer long. Crumple Ice Tie-Dye T-shirt Want to make a totally amazing T-shirt with as little effort as possible? We've got the perfect project for you! This T-shirt was created using the crumple tie-dye technique, which is pretty much the easiest tie-dye technique ever. All you have to do is scrunch up a damp T-shirt into a mound - and you don't even have to bind it with rubber bands if you don't want to. Scrunch it up, throw some ice on top, sprinkle on dye colors from the Ice Cream Shoppe Tie-Dye Kit and you're done! With all that time you saved, you can get to work on another tie-dye project. Or do nothing, up to you. Ice Tie-Dye Shoes Ice tie dye isn't just for T-shirts ... try it on shoes too! As long as your shoes are made from a natural-fiber fabric like canvas (cotton), you can totally tie dye them. Make sure to remove the laces (if you don't want to dye them), tape up the soles to protect them from getting stained, and you're ready to give your shoes a next-level makeover. We love how these turned out like a watercolor painting ... every result is one of a kind with ice tie dye! Pleated Stripes Ice Tie-Dye T-shirt We're obsessed with how bright and bold this ice tie-dye T-shirt turned out, but you can create one in this same style with a more subdued hue like black or blue for an edgier vibe. Or if you love even more color, add several shades! The pattern itself only looks complex, but we promise it's easy to do. Follow the stripes tie-dye technique, using smaller pleats for your fabric. Then use zip ties or rubber bands to tightly secure your pleated fabric every few inches. Place a mound of ice on top, sprinkle on that dye powder and give yourself major kudos for your tie-dye skills. After all of this ice tie-dye inspo, we're ready for a cold treat, aren't you?!
Stay Cool in These Ice Tie-Dye Looks
Stay Cool in These Ice Tie-Dye Looks
Published Date: September 09, 2022 Summertime is the perfect time to try the ice tie-dye technique! Hot weather calls for cooling off in style, which is one of the many reasons we're big fans of ice tie dye. The other reason we love this fun tie-dye technique is that the ice does the dye work for you, so you can kick up your feet with a cold bevvy and relax while the tie-dye magic is happening. That's right, no need to mix up your dyes; just pour the powder over a mound of ice with your project underneath and let the melting process create the coolest watercolor effects. To help get you inspired, here's a roundup of ice tie-dye projects featuring a mix of colors and tie-dye patterns. Check 'em out then raid your freezer and get started on your new favorite tie-dye technique! Supplies needed - Tulip One-Step Tie-Dye Kit of choice - White 100% cotton T-shirt - White canvas shoes - Wire rack - Bucket - Ice (enough to cover entire project) Instructions Kaleidoscope Ice Tie-Dye T-shirt If you had a kaleidoscope as a kid, you'll definitely remember how cool it was to look through the view opening and see all of the colors twist, dance and change shape as you rotated the piece on the end. This tricked-out tie-dye T-shirt is just like that! With all of its colors and winding patterns, it's no wonder we called this technique the Kaleidoscope Ice Tie-Dye Technique! For this one, you'll want a larger tie-dye kit so you can use a lot of different dye colors. Follow the easy tutorial to create an ice tie-dye T-shirt that's pretty much guaranteed to be your go-to tee all summer long. Crumple Ice Tie-Dye T-shirt Want to make a totally amazing T-shirt with as little effort as possible? We've got the perfect project for you! This T-shirt was created using the crumple tie-dye technique, which is pretty much the easiest tie-dye technique ever. All you have to do is scrunch up a damp T-shirt into a mound - and you don't even have to bind it with rubber bands if you don't want to. Scrunch it up, throw some ice on top, sprinkle on dye colors from the Ice Cream Shoppe Tie-Dye Kit and you're done! With all that time you saved, you can get to work on another tie-dye project. Or do nothing, up to you. Ice Tie-Dye Shoes Ice tie dye isn't just for T-shirts ... try it on shoes too! As long as your shoes are made from a natural-fiber fabric like canvas (cotton), you can totally tie dye them. Make sure to remove the laces (if you don't want to dye them), tape up the soles to protect them from getting stained, and you're ready to give your shoes a next-level makeover. We love how these turned out like a watercolor painting ... every result is one of a kind with ice tie dye! Pleated Stripes Ice Tie-Dye T-shirt We're obsessed with how bright and bold this ice tie-dye T-shirt turned out, but you can create one in this same style with a more subdued hue like black or blue for an edgier vibe. Or if you love even more color, add several shades! The pattern itself only looks complex, but we promise it's easy to do. Follow the stripes tie-dye technique, using smaller pleats for your fabric. Then use zip ties or rubber bands to tightly secure your pleated fabric every few inches. Place a mound of ice on top, sprinkle on that dye powder and give yourself major kudos for your tie-dye skills. After all of this ice tie-dye inspo, we're ready for a cold treat, aren't you?!
Matching Dog & Owner DIY Scarecrow Costumes
Matching Dog & Owner DIY Scarecrow Costumes
Dressing up for Halloween is even more fun when you get to coordinate with your furry friend! These matching dog & owner DIY scarecrow costumes are super easy to make with no sewing needed - just Aleene's Fabric Fusion. Whether you're going to a dog-friendly Halloween party or handing out candy to trick-or-treaters, you can make these DIY scarecrow costumes last minute without breaking your budget. What you need: - Aleene's® Fabric Fusion® - Denim overalls - Denim doggy overalls - Straw hat (sized for owner) - Dog straw hat - Assorted fabrics and burlap for patches - Faux flowers and leaves (fall colors) - Buttons - Raffia - Scissors with decorative edges Use decorative edge scissors to cut patches from different fabrics and the burlap. Cut smaller ones for the doggy overalls. Lay out patches on each set of overalls to your liking, then glue in place with Fabric Fusion. Tip: use a thin line of glue around backs of patches, or you can even use a paintbrush to evenly brush a thin layer of glue over entire patch. Too much glue can oversaturate the fabric and cause adhesion issues. Glue buttons onto patches and let dry. Decide placement of flowers, leaves and raffia on hat and glue in place. Repeat on mini straw hat. Let dry completely. Tuck raffia in pockets for added effects, and glue a few faux leaves onto the overalls if desired. Your DIY Scarecrow costumes are now complete. You and your little mini me are ready to win "best duo" during the costume contest at your Halloween party!
No articles match the selected filters.
The Family of Brands
Meet the Brands Behind
Your Next Project
Seven creative brands. One place to shop. Explore the tools, colors, and ideas makers trust.







