Rainbow Tie-Dye
Easy Paint Dripping Technique with Puff Paint
How to create with the easy dripping technique with Puff Paint. What You Need Tulip Puff Paint Aleene’s Clear Casting & Coating Epoxy Resin Kit Stainless steel tumbler Red adhesive permanent vinyl Vinyl decal Glitter and Peppermint Sprinkles Electrical or resin tape Heat gun Wooden stir sticks Plastic cups Safety gear Tumbler spinner Red trim (optional) Aleene’s Original Tacky Glue (optional) Step 1 Remove the lid from the tumbler if necessary. Cut a piece of red adhesive vinyl to fit the tumbler and carefully adhere it in place. Apply the vinyl decal to the front of the tumbler. Step 2 It’s time to create paint dripping effects on your tumbler! Use the Tulip Puff Paint to create a frothy marshmallow drip around the top of the tumbler. Hold the tip of the Puff Paint to the tumbler and gently squeeze, rotating the tumbler until you’ve created dimensional paint drips all the way around. Use more paint for larger drips and less paint for smaller drips— gravity will do all the work to create dazzling dripping effects! Be careful to not get any paint inside the mug or directly on the rim; clean with soap and warm water if you do. Step 3 Add faux peppermint sprinkles and glitter to the paint drips while the Puff Paint is still wet. Let the paint dry completely before proceeding. Step 4 (optional) Cut red trim to fit along the bottom of the tumbler and secure with Tacky Glue. This step is totally optional, but provides a cleaner final look to your winter tumbler! Step 5 Cover the handle and inside of the tumbler with electrical or resin tape and place onto your tumbler spinner. Make sure you’re wearing protective safety gear before working with resin! Use disposable plastic cups and wooden stir sticks to mix the Aleene's Clear Casting & Coating Epoxy Resin according to package instructions. Step 6 Start the tumbler spinning slowly. Carefully pour the epoxy resin onto the tumbler and use a gloved finger to spread the epoxy evenly over the mug, sealing in your custom designs! Step 7 Glide the heat gun above the tumbler as it turns to eliminate bubbles. Let the tumbler spin for at least 12 hours while the epoxy resin cures. Step 8 Once the epoxy resin is cured, remove the tumbler from the spinner. Remove all the tape, wash thoroughly, and replace the lid. Your custom paint drip tumbler is now ready for winter!
How to Hydro Dip Shoes with Spray Paint
You’ve seen these cool, swirly shoe designs floating around the internet, but did you know that you can create that marbled look at home with a method called hydro dipping? It’s a great way to personalize your wardrobe or create a perfectly unique gift to that special someone. Grab a pair of Crocs or white canvas shoes, some COLORSHOT Premium Spray Paint, and follow our tutorial to learn how to hydro dip for one-of-a-kind kicks. The process is simple, but we suggest practicing on some cheap shoes before moving on to more expensive ones. Trial and error are your friends! Choose your shoes Make sure to work outside in an open space and wear a protective mask and gloves. Start by taping the part of your shoes you won’t want dyed and trimming the tape with your craft knife. If you’re using Crocs, you can remove the strap as well. Crocs have a slick plastic surface, so you’ll want to use acetone to wipe them down before painting them. This will strip away the factory finish coating and allow the paint to adhere to the shoe. Fill bin with water Fill a bin with room temperature water. Choose your favorite colors of COLORSHOT Premium Spray Paint and spray in the water to create a unique swirl pattern. Now it’s time to learn how to hydro dip your shoes! Dip shoes in paint/water mixture Once you’re happy with the desired effects of the paint in the water, slowly dip your shoes. It’s best to dip at a near 45-degree angle. You can start with the tip of the shoe and slowly work your way in. It is important to dip the shoes completely and then quickly clean the surface and wipe away the rest of the paint. Let shoes dry and apply sealer Allow your painted shoes to dry completely. Once dry, spray with a generous amount of COLORSHOT Clear Sealer. Peel off tape Peel off the tape and your new hydro-dipped shoes are ready to step into the world! Now that you’ve learned how to hydro dip your shoes, we want to see your colorful creations! How are you using COLORSHOT to customize your kicks? Tag us on social @MyColorshot!
Easy DIY Leopard Print Shoes
If you’re a fan of Pinterest (as most DIYers are), you’re probably hit with fashion inspo every single day. One style that’s been particularly in is the comfy slide that comes in so many different varieties; there’s the classic black look or the chic shoe lined in fur, just to name a few. And since leopard print is also back in a big way this year, you can't go wrong with a pair of leopard print slides that are guaranteed to go with every outfit! You can definitely snag a pair on discount, or just grab a pair from your closet that needs a makeover and check out this easy DIY leopard print tutorial from Holly at Club Crafted using Tulip Puff Paint. You'll see that this easy technique can be applied to any shoe that you desire! What you need: - Tulip Puff Paint - Shoes First, you’ll need to grab your brown Tulip Puff Paint and get to work! The initial shape should be very natural looking and easy to do - splotches if you will. Feel free to get experimental and try different shapes and sizes. While your brown paint is still wet, you can get started on the black paint. Simply partially outline the brown shapes to start formulating the cheetah print. Do not trace the entire shape, just a random selection. Before you know it, you’ll start recognizing the leopard print pattern. From there, repeat the above steps on both shoes to complete your unique animal print design. DIY leopard print shoes are one of the easiest ways to completely change the look of a shoe. Now that you’ve done it to shoes, what else will you spot up? A bag? A clutch? Don’t shy away from experimenting!
Easy No-Sew Tutorial: Fabric Embellished Shoes
Designing your own shoes is a total possibility these days, but it will likely cost you a pretty penny! Luckily, there are endless ways to customize a pair of kicks with your personal style that don't cost much at all. This set of fabric embellished shoes was so easy to make using bright watermelon printed fabric and Aleene's® Spray Pump Fabric Fusion ... so easy in fact, that we made a pair for little feet too! Check out the video tutorial below to get inspired to create your own set of Mommy & Me shoes, or a set for you and your BFF or just several pairs for yourself! What you need: - Aleene's Spray Pump Fabric Fusion- Canvas sneakers- Fabric - desired color/pattern- Scissors- Freezer paper- Pencil Remove the shoelaces and fold down the sides to expose as much of the tongues as possible. Lay a piece of freezer paper under the tongue and trace around it to create a pattern. Make sure to leave an extra 1/4" at toe of each pattern piece. Lay pattern on fabric and cut out. Spray the backside of "toe" end of each fabric piece with Fabric Fusion Pump Spray and fold over to create a finished edge. Allow to dry. Fit each piece of fabric over tongue and trim any overlap at bottom of tongue where the fabric meets the rubber toe cap. Spray back of fabric piece with Fabric Fusion Pump Spray, and align finished edge (toe end) up against the rubber toe cap. Smooth remaining fabric over tongue. Allow to dry. Repeat on second shoe. Trim any remaining excess fabric. Repeat process for second pair of shoes.
No articles match the selected filters.
The Family of Brands
Meet the Brands Behind
Your Next Project
Seven creative brands. One place to shop. Explore the tools, colors, and ideas makers trust.
Tulip Color
Aleene's Adhesives
COLORSHOT Premium Spray Paint
Scribbles
Puffy Paint
#BeYou
CreateBasics
